解剖学报 ›› 2020, Vol. 51 ›› Issue (6): 919-923.doi: 10.16098/j.issn.0529-1356.2020.06.017

• 解剖学 • 上一篇    下一篇

肝门静脉解剖和影像三维重建的临床应用

张慧1 周庭永2 刘晖1 吕发金3*   

  1. 1.长沙医学院人体解剖学教研室,湖南省应用特色学科,长沙 410219; 2.重庆医科大学解剖学教研室,法医学与生物医学信息研究室,重庆 400016; 3.重庆医科大学附属第一医院放射科,重庆 400016
  • 收稿日期:2019-07-08 修回日期:2019-08-24 出版日期:2020-12-06 发布日期:2020-12-06
  • 通讯作者: 吕发金 E-mail:ztychina@126.com
  • 基金资助:
    湖南省普通高等学校教学改革研究项目;湖南省教育厅科学研究项目

Clinical application of hepatic portal vein anatomy and three-dimensional reconstruction of images

ZHANG Hui1 ZHOU Ting-yong2 LIU Hui1 Lü Fa-jin3*   

  1. 1.Department of Anatomy, Changsha Medicine University and Application Characteristic Discipline of Hu’nan Province,Changsha 410219,China; 2.Department of Anatomy, Laboratory of Forensic Medicine and Biomedicine Information of Chongqing Medicine University, Chongqing 400016, China; 3.Department of Radiology, the First Affiliated Hosiptal of Chongqing Medical University, Chongqing 400016, China
  • Received:2019-07-08 Revised:2019-08-24 Online:2020-12-06 Published:2020-12-06
  • Contact: Lü Fa-jin E-mail:ztychina@126.com

摘要:

目的  观测门静脉肝内段二级分支的形态特征和分支分布规律,为诊断和治疗肝脏疾病提供更为详尽的解剖学及影像学资料。 方法  100例无肝病的成人多排螺旋CT(64-MSCT)增强扫描肝门静脉获得数据,利用CT自带的GE ADW 4.5工作站对其进行三维重建,并结合50例成人肉眼无病变尸肝对肝门静脉进行解剖剥离,观测及比较肝门静脉分支规律并采集相关数据进行统计学分析。  结果  影像重建和大体解剖的近第1肝门处肝门静脉内径分别为(11.20±1.48)mm和(10.86±2.01)mm;左、右支主干夹角分别为(93.58±24.03)°和(105.59±13.82)°;左支横部长分别为(29.50±6.51)mm和(23.90±5.29)mm,中点内径分别为(7.70±1.55)mm和(7.43±1.09)mm;右支主干长分别为(21.77±10.35)mm和(20.63±6.59)mm;中点内径分别为(9.10±1.66)mm和(9.26±1.77)mm。依据肝门静脉的分支情况可将其分为4型。  结论  肝门静脉变异情况并不少见,其分支的直径与夹角等均存在一定的变化,在肝外科手术实施时,对门静脉主干分支各型应给予高度的重视。

关键词: 肝门静脉, 分支分布, 多排螺旋计算机X线断层摄影术, 大体解剖学,

Abstract:

Objective  To observe the morphological characteristics and branch distribution of the primary branch of portal vein in the liver, and provide more detailed anatomical and imaging data for the diagnosis and treatment of liver diseases.   Methods  One hundred adults without liver illness scaned by 64-MSCT enhanced scaner data of hepatic portal vein, were reconstructed by GE ADW 4.5 workstation with CT. Combined with 50 cases of adult human without pathological cadaveric liver, the hepatic portal vein was anatomy stripped. The branching rules of hepatic portal vein were observed and compared, and relevant data were collected for statistical analysis.   Results  Image reconstruction and gross anatomy of the internal diameter of the portal vein at the first hepatic portal were (11.20±1.48) mm and (10.86±2.01) mm, respectively. The angles of the left and right branches were (93.58±24.03)° and (105.59±13.82)°; the length of pars transverses on the left stems were (29.50±6.51) mm and (23.90±5.29) mm, and the midpoint inner diameter were (7.70±1.55) mm and (7.43±1.09) mm, respectively; the right branch trunk length were (21.77±10.35) mm and (20.63±6.59) mm; the inner diameter of the midpoint were (9.10±1.66) mm and (9.26±1.77) mm, respectively. According to the branch of the hepatic portal vein, it could be divided into 4 types.   Conclusion  The variation of hepatic portal vein is not uncommon. There are certain changes in the diameter and angle of the branches. When the liver surgery is performed, the main branches of the portal vein should be given high attention. 

Key words: Hepatic portal vein, Branch distribution, Multi-slice computed tomography, Gross anatomy, Human

中图分类号: